Problem with my ball

[sondre hd]

Hi

After 2 days, i opened the ball and found out that it was all white at the internal surface were it is spinning. This comes from the rotors support band, but i cant get this away, it stands that this can happend whit older balls. But after 2 days?
what should i do with this??

And now the rpm counter dosen`t work ether. what shold i do with these problems?
i am wery carfully with the ball, and newer droped it on the floor.

[petemayhew]

Hi,

The white stuff inside your ball, are you talking about the inside of the casing shells or the inside of the rotor?

You can get a damp cloth to rub the white stuff off the inside of your rotor/casing. It should come off. If it doesn't don't worry as it shouldn't effect your ball too much.

If your counter is not working and it's water related then putting it in a hot dry area (Airing cupboard) for a day should sort it out. If not then it might be a pressure problem with the screws at the back. But try the first option then post back if you have any further problems.

[sondre hd]

thx for the tips, shall try that.
will inform you if it helps.

[Sayex]

Where did you bough the ball?

[sondre hd]

i bought it here, online.
and i tryed out diffrent things with the counter, but it still don`t want to turn on.
got the neon blue pro, if that helps you
whith the counter, I cheked the screws, and it hasen`t been on a wet place or in contakt with water.

[xaverr]

Maybe in the travel suffered some hit...

[Sayex]

This its pretty weird for a new ball

[jihmmie]

The batteries are installed correctly and aren't loose? That's the only reason I can think of for a stock counter to not power up.

[sondre hd]

The counter worked the first day and half the second, so i don`t think it took some hit in the travel. and i have cheked the bateries, chall try open it to day, maby somthing just hit me.



Thank you for all the respons

[Sayex]

Mmmm maybe send it back to the doc?